Let your agent fix a home problem inside limits you set
- Level Advanced
- Setup1–3 hrs (estimated)
- Evidence Some evidence
- CostNot stated in source
- No-codeNo
What they did
A user's home automation agent noticed the humidity in his garage workshop had climbed from 47.8% to 61.4%, past the 60% line where tools start to rust, because the dehumidifier had been switched off. It first checked whether opening the vent would help by comparing absolute humidity inside and outside (12.31 vs 12.05 g/m³, nearly the same), decided it wouldn't, turned the dehumidifier on through the home automation API, confirmed the command worked and kept measuring.
How it went
Four hours later the reading was back under 60% and still falling. His house rule now: set limits once, let agents act and verify inside them, and ask first outside them or for anything irreversible.
Worth knowing
- Self-reported X post; the agent and home automation system aren't named. Giving an agent control of devices needs clear limits like the ones he describes.
Prompt
Cleaned version rewritten from the source — not a direct quote.
Watch my [garage/room] humidity sensor. If relative humidity goes above [60%], check whether outside air would help by comparing absolute humidity inside and outside, and either open the vent or turn on the dehumidifier through [home automation system]. Confirm the device accepted the command, keep measuring until it's back under the limit, and leave me a note. Ask me first for anything outside these limits.
Recommended
Try it in Grok Bot
Originally done with an unnamed agent; this works in Grok Bot if your home automation system has an API or connector.
- Copy the prompt (button below).
- Open Grok Bot chat and paste it. Replace any [bracketed] placeholders.
- Connect the listed tools (as needed) as connectors when Grok Bot asks.
- If the task repeats, ask: "Make this a daily routine."
Alternatives: the same prompt works in Claude, ChatGPT Agent, OpenClaw.
Set it up
Stack: Unnamed AI agent + home automation API
- Read the original source for full context.
- Connect the tools your agent needs.
- Paste the prompt and replace [bracketed] placeholders.
- Run once manually and check the output before scheduling it.
Generic suggested steps, not from the source.
Evidence
Self-reported X post; the agent and home automation system aren't named. Giving an agent control of devices needs clear limits like the ones he describes
Source: X · 2026-10-08 · Verified by us: not yet · Report broken or outdated